Model No.: DI6X-2
1.Max output: 1000LM
Maxtoch DI6X-2 Waterproof LED Diving T6 Features:
*LED Type: CREE XM-L T6
*Max output: 1000LM
*Beam: Micro Orange Peel Reflector for flawless beam
*Lens: Anti-shattering ultra clear lens, anti-scratching and anti-slip
*Finish: HA Type III
*Waterproof: IPX8 (Underwater 200 meters)
*Switch: Head switch
*Battery: 2PCS 18650 or 2PCS 26650
*Circuit efficiency: 85%
*Size: L 210 mm (8.66'') *D 46 mm (1.81'')
*Tighten head to turn it on. Turn head counter clockwise (loosen) to turn off light. To switch modes while light is on, turn light off and on within one second, Light will enter next mode.
*Remove the tail cap, insert the batteries with the positive ends toward the head of the light, replace the tail cap.
Output & Runtime:
*Max output of 1000 lumens for approximately 3.5 Hours
*Min output of 520 lumens for approximately 6 Hours
Note:Stated brightness and runtime figures are based on tests using 2PCS 26650 Li-ion batteries (approximate 4000mAH) under laboratory conditions. Variances in these figures will occur depending on batteries used and individual usage habits.
|Max Output (LM)||1000||Runtime (H)||3.5|
|Distance (m)||Underwater 200||Rated Output (W)||10|
|Rated Voltage (V)||3.3||Rated current (mA)||3000|
|Length (mm)||210||Head Diameter (mm)||46|
|Weight (g)||398||Battery||2*18650 or 2*26650|