Model No.: BI6X-2
1.6 years OEM & ODM Factory
2.ANSL/NEMA FL1-2009 Standard
Maxtoch BI6X-2 3*XML T6 Aluminum CREE LED High Power LED Bike Light Features: *LED Type: CREE XM-L T6
*Max output: 1400LM
*Beam: Smooth Reflector and powerful beam *Lens: Toughened ultra-clear glass *Finish: HA IlI Grade *Waterproof: IPX6
*Modes: Min-Mid-Max *Battery: 4*18650 battery pack *Size: 36mm*56mm/24mm*50mm
*Press the tail switch once and the light will turn on. With the light turned on, press the tail switch,the brightness level will switch between four modes ( Min,Mid,Max ,Off)
*Remove tail cap, insert the batteries with the positive ends toward the head of the light, replace the tail cap. Parameters:
|Max Output ( lm )||1400||Runtime ( H )||4|
|Distance ( m )||150||Battery||4 * 18650 pack|
|Weight ( g )||950||Size ( mm )||36*56/24*50|
*Max output of 1400 lumens for approximately 4 Hours *Min output of 100 lumens for approximately 48 Hours Note:Stated brightness and runtime figures are based on tests using 4PC 18650 Li-ion battery(approximate 4400mAH) under laboratory conditions. Variances in these figures will occur depending on batteries used and individual usage habits.
Model NO.: PV-G001 Illumination Time: 18h Cell Type: LiFePO4 Lithium Battery Charging Time (H): 6 Usage: Garden, Street, House IP Rating: IP65 Certification: CE, RoHS Voltage: 3-6V With Light Source: With Light Source Warranty: 3 Years Delivery Time: 7-21days Trademark: cheemey or OEM Transport Package: Carton...
On January 27, 2011, Cree launched ENERGY STAR? 60-watt LED replacement A-lamp for standard LED replacement bulb performance. “This is an important milestone for the industry,” said Chuck Swoboda, president and CEO of Cree. “In the competition to introduce low-cost, energy-saving LED bulbs to the market, the industry has...
Philips and its upstream supplier of LED components, Philips Lumileds, are focusing on the development of high-power LED-related products. High-power LEDs can maintain LED high luminous efficiency under high current driving, and improve LED cold-heat function, making the LED light output more The previous generation product...
Conventional injection molding typically uses steel tooling capable of producing millions of parts, however, it often takes months to manufacture a mold and a capital investment of $50,000 or more. But what if production demands call for smaller quantities? That`s where aluminum tooling is ideal. Here`s a quick look at the...