Find Metal Detector for Precious Metal,High Stable Hand Held Metal Machine,Metal Detector with Shock Resistance on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > LED Down Light > Super Scan High Performance Hand Held Metal Detector

Super Scan High Performance Hand Held Metal Detector

  • Super Scan High Performance Hand Held Metal Detector
  • Super Scan High Performance Hand Held Metal Detector
  • Super Scan High Performance Hand Held Metal Detector

Super Scan High Performance Hand Held Metal Detector

    Payment Type: L/C,T/T
    Terms of Trade: FOB,CFR,CIF
    Min. Order: 1 Bag/Bags
    Delivery Time: 5 Days
    Packaging: paper carton
    Productivity: 10000 pcs/month
    Brand: Anhushen
    Transportation: Ocean,Land,Air
    Place of Origin: China
    Supply Ability: 10000 pcs/month
    Certificate: ISO ,CE
    Port: Shenzhen

Basic Info

Model No.: JH1001

Certification: ISO, CE

Customized: Non-Customized

Application: Factory, Public Area, Examination Room

Alarm Form: Sound and Light Alarm

Size: 295mm * 68mm * 28mm: Weight: 170g (without Batteries)

Product Description

High performance hand held metal detector

JH1001 hand held metal detector is a metal detector for precious metal.There are high and low two kinds of sensitivity options.The handheld metal detector machine has two alarm modes are available, LED lights and audible alarm or vibrating alarm.It is a high stable machine with superior shock resistance.



PRECAUTIONS:

1. Turn off the power after use, Don`t forget! Long time not to use please take out the battery

2. when the detector is fixed against the metal, It does not send sound or vibration , sound or vibration only occurred when the detector scanning;

3. When charging, please note that with the use of rechargeable batteries, Otherwise it may cause the battery to explode; charger voltage: AC or DC 12V, 1000MA;

4. When using an external power supply, you can remove the battery, then use the sufficient power supply, or it may cause the detector does not work.


TECHNICAL PARAMETERS :

1, Alarm Indication:

Flashing green LED: Power

Flashing red LED: Target has been detected

Continuing yellow LED: Low Voltage Directive

Metal indication LED: detection of objects of different sizes, the light from green to red gradient

2, Power supply: 9V battery standard

3, Power consumption: max 270MW

4, Operating frequency: 22KHZ

5, Standby current: <5MA

6, Operating Voltage: DC 7 ~ 12V

7, Working temperature: -10 ℃ ~ 65 ℃

8, Reset time: 0.5 seconds, the automatic

9, Staple 30-50mm 2 Tiananmen-style pistol 200mm

10, 38 Caliber Pistol 250mm

11, Weight: 170g (without batteries)

12, Size: 295mm * 68mm * 28mm


INTRODUCTION:

1. Airports, railway stations, docks electronic detection checks;

2. customs, public security, frontier defense, the defense department security checks;

3. Medicine, food quality inspection business systems;

4. sawmill detection nails, important places, playground safety inspection;

5. precious metal detection, such as gold and silver jewelry factory, electronics factory.


FEATURE:

1. streamlined appearance, small and exquisite, easy to carry; easy to use, convenient, no need to adjust;

2. with battery voltage indicator; When the battery is low, the yellow light will on, to remind you to charge or replace the battery;

3. electricity province, 250MA battery charging time can work continuously for more than 40 hours; When 9V battery down to about 7V, the same detection range;

4. two alarm modes are available: LED lights and audible alarm or vibrating alarm;

5. light weight, large area detection sensor to detect speed;

6. There are high and low two kinds of sensitivity options;

7. has an external charging jack: After installing rechargeable battery, you can charge your detector with a charger(12VDC power supply)

8. with superior shock resistance, durable, one meter height of free fall without damage;

OPERATION:

1. Turn the power switch (10) to hear alert sound or vibrate, which means that the power is turned on,. when the green light blinking, the detector can be use. If the green light is not bling, maybe the battery is broken, or the battery cannot be reused, when the yellow light on , please recharge or replace the batteries with new.

2. sound, vibration change option: switch (10) for the third gear switch, intermediate stops to turn off the power, docked one side of an audible alarm, vibration alarm the other direction.

3. After the power is turned on, you can perform high sensitivity detection, Scan the target with the Detection Area ,when metal be detected the red light on and the alarm sound or vibration.

4. low sensitivity detection: If you need a low-sensitive detection (such as in the vicinity reinforced of the ground to find a coin), you can hold down the low sensitivity switch (9),then the sensitivity reduced to about 1/5.

5. Charging: when the yellow light is on, It`s means the battery power is low, please connect the charger. when the battery voltage reaches 9V, green light (8) will light up when the green bright enough to prove ,that the battery is fully charged. (Charging time depends on the specific battery capacity, our factory standard battery is about 3 to 6 hours to full)

Metal Detector for Precious Metal


  • 1
  • 2
  • 3
  • 4
 

Junhong Electronic&Technology (Dongguan) Co., Ltd is a professional metal detector manufacturer since 2005, specialized in R&D of security detection technology. We have various of products range: Walk through metal detectors, hand held metal detectors, X-ray luggage scanners, X-ray body scanner; Infrared Body Temperature Detection System; explosives detector, under vehicle surveillance systems; etc. which are widely used in security and related industries.

Our factory locates Dongguan city which is Called the largest electronic products city in China. Under the effort of all our staffs, We have established a Junhong Industrial park of 70,000 square meters in Jianghua County, Hunan Province.

As a manufacturer, We can offer professional products and service for worldwide customers. We Strictly conforms to international standard of ISO9001. with a strict quality control system, We supervise all the production processes from material purchasing, processing and storage to delivery. providing the best products and service to our customers.

In the international market, we provide customized services for customers. By the means of reliable quality and super service, we have earned a good reputation at home and abroad. Our mission is keeping everybody safe and establish a harmony society and make the world becoming better place. We sincerely welcome customers from both at home and abroad to cooperate with us to develop friendly and mutually beneficial business relationships for long term.


Company Info

  • Company Name: JUNHONG ELECTRONIC & TECHNOLOGY (DONGGUAN)CO., LTD.
  • Representative: Yankun Peng
  • Product/Service: X-ray Scanner , Metal Detector , Check Weigher , Industrial Metal Detector , Underground Metal Detector , Walk Through Metal Detector
  • Capital (Million US $): 5000000RMB
  • Year Established: 2005
  • Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
  • Export Percentage: 71% - 80%
  • Total Annual Purchase Volume (Million US $): US$10 Million - US$50 Million
  • No. of Production Lines: 3
  • No. of R&D Staff: 11 -20 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: No.23,Xintian Street,Bozhoubian, Dongcheng District,DongGuan,Guangdong,China.
  • Contact Person: Ms. Cherry
  • Tel: 86-769-22688612
Email to this supplier
  • *Subject:
  • To:
     Amanda Ye Leave Messages
    Ms. Amanda Ye Leave Messages
  • *Messages:
    Your message must be between 20-8000 characters