Model No.: HI6X-17
1. 6 years OEM & ODM Factory;
2. STRICT QC;
3. ANSL/NEMA FL1-2009 Standard;
4. CE, ROHS, FCC Approved;
Maxtoch HI6X-17 Deep Reflector 1000LM 18650 Li-ion Battery LED Flashlight For Hunting Product Description:
*LED Type: CREE XM-L T6
*Finish: HA II
*Reflector: Smooth Reflector Features:
*LED Type: CREE XM-L T6
*Max output: 1000LM
*Beam: Smooth Reflector for focused beam
*Lens: Toughened ultra-clear glass *Finish: HA II
*Switch: Tail cap switch
*Modes: Min-Mid-Max-Strobe-SOS *Battery: 1*18650
*Circuit efficiency: 85%
*Size: 156mm( Lengh ) * 44mm(Head) * 25.4mm(Tail)
*Press tail switch for turning light on/off.
*With the light turned on, gently press the tail switch, the brightness level will switch between five modes (Min,Mid,Max,Strobe,SOS) *Remove tail cap, insert the batteries with the positive ends toward the head of the light, replace the tail cap. Parameters:
|Max Output ( lm )||1000||Runtime ( H )||1.5|
|Distance ( m )||350||Battery||1 * 18650|
|Weight ( g )||155||Size ( mm )||156 * 44 * 25.4|
*Max output of 800 lumens for approximately 1.5 Hours
*Mid output of 400 lumens for approximately 3 Hours
*Min output of 80 lumens for approximately 15 Hours
Note:Stated brightness and runtime figures are based on tests using 1PC 18650 Li-ion battery(approximate 2400mAH) under laboratory conditions. Variances in these figures will occur depending on batteries used and individual usage habits.
For the first time, the aluminum deep processing project in Henan Province was supported by syndicated loans. On June 23rd, Luoyang Wanji Aluminum signed contracts with the Bank of China, Industrial and Commercial Bank of China, Agricultural Bank of China and China Everbright Bank in Henan, and four banks joined hands to...
Although China has already clarified the target and direction of price reforms for resource products and formulated comprehensive reform plans for oil prices, due to the influence and concerns of various external factors, the pace of reforms to rationalize the relationship between energy prices such as oil has been slow. In...
Deep well pump installation requirements and inspection: First, diving deep well pump should still make the following inspection: 1 electrical connector should be immersed in water for 6 hours, with 5000 V shake table measurement, the insulation resistance of not less than 5 Megohm; On the blue protective cable groove,...
Deep well pump working principle introduction Deep well pump working principle is to raise water from the well vane pump, long shaft deep well pump is a more widely used deep well pump, a pump, generally used for machine wells. Deep well pump is mainly composed of three parts: the top is the motor, installed in the middle...