Bar Code Access Control Flap Barrier System
Basic Info
Model No.: RS 488
Product Description
Bar Code Access Control Flap Barrier System
The flap gate optical turnstile system can support cardback devices : IC/ID card reader, barcode scanner, ID reader and biometric identification etc, easy to connect with access control system, elevator system and intercom system.
The brushless DC servo technology and the professional-grade speed reducer are used to make service life reach up to 5 million cycles and almost no noise. The infrared sensor is used to achieve anti-tailgating and anti-pinch, the minimal detection distance is up to 10 cm, high security.
Function and Feature
1. 304 Stainless steel , self designed, good appearance, toughened glass in reader window to prevent hurt, LCD on top(option) to display user information.
2. Several pairs of infrared sensors to prevent hurt when with baggage or children , can customized for more accurately control and judgment.
3. sensors and firmware to prevent tagging after and alarm
4. High light huge LED on top and besides shows the direction and its status, Red to show prohibiting passing and Green to show allowing passing, it can be controlled by software when to light red when to light green.
5. NO(Normally Open)/NC(Normally Closed) mode optional to relax the following speed
6. Self reset function. When user doesn`t passing in sett time, the system will automatically cancel this passing, the time can be set in software
7. It Can be set passing mode by software: one way passing after authorization, both way passing after authorization, both way passing without authorization.
8. Waterproof and ventilative structure makes mechanism and electrical parts safe and using life, in order to apply in any using condition.
9. Rich input interfaces can be connected to several external equipment like alarm, readers, identification equipment, LCD display, counter meters, remote panels, ect.
10. It can be connected to the internet(clouds) so that it can be manage far from installation place.
Technical specification
Material | 304 stainless steel | Input voltage | 110V/220V ±10%,50/60Hz |
Size | 1200x300x980mm | Arm width | 265m |
Net weight | About 70kg/unit | Arm material | Acrylic or soft arm |
Motor | 24V DC brush | Top Cover | Acrylic or stainless steel |
Communication interface | RS485 | Sensor beams | 5 pairs for 1 complete lane |
Transit speed | 30-40 people/minute | MTBF | 5000,000 times |
Close and open time | 0.6S | Input interface | Relay signal, 12V level signal, |
Clear passage width | 600mm ( standard) , 900mm (optional) | Work environment | Indoor and outdoor (shelter) |
Number of led lamp | 5 pcs | Model | RS 888 |
Flap gate size:
Flap barrier aplication:
Turnstile factory views:
Flap turnstile package:
Contact us if you need more details on School Turnstile Gates. We are ready to answer your questions on packaging, logistics, certification or any other aspects about School Turnstiles Bus、School Turnstile Gate. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Turnstile > Optical Turnstile